• info@nakodasteelindustry.com

Tag Archives: carbon steel astm a106 ITALY

Carbon Steel Seamless Pipe

Carbon Steel Seamless Pipe

carbon steel exporters

Nakoda Steel Industry is one of the pioneers in Carbon Steel Seamless Pipes manufacturer , which forestalls spalling of the defensive layer. The arrangement of Carbon Steel Bush Hex Pipes incorporates significant measures of nickel, chromium, and aluminum for a high level of protection from oxidation and carburization at high temperatures. The fantastic obstruction of Carbon Steel Hallow Pipes to oxidation results from the combination’s chromium and aluminum substance. At raised temperatures, those components in Carbon Steel Hexagonal Pipes cause the arrangement of a flimsy, subsurface zone of oxide particles. The zone of Carbon Steel Rectangular Pipes shapes quickly upon introduction to high temperatures until it arrives at a brilliant thickness.

The oxide zone of Carbon Steel Square Pipes gives the best possible dissemination conditions to the arrangement of a defensive chromium oxide layer on the outside of the metal. Nakoda Steel International is one of the well – realized sending out house and vendor for Carbon Steel Round Pipes, which shows strangely great metallurgical steadiness for a combination of its quality level. Carbon Steel EFW Pipes demonstrates the predominance of over combinations of comparative quality in a gas – carburization test at 1800 Degree F. In bubbling nitric corrosive, at fixations under 20 %, erosion paces of Carbon Steel ERW Pipes are less. At 70 % focus, the pace of Carbon Steel Welded Pipes is a moderately low, where the rates were resolved from trial of 72 hours term. 

Carbon Steel A53/A106 gr B Carbon Steel Pipe, CS Seamless Pipes, Carbon Steel Bush Hex Pipe, Carbon Steel API5L Pipes Exporter, CS Hexagonal Pipe, A106 CS Seamless Pipes, CS Hollow Pipe, Carbon Steel Seamless Black Round Pipes Manufacturer in India.

Carbon Steel Seamless Pipes Specifications

A53 A106 API5L Grade B/C X42 Seamless Pipe
Size Range : 2″ – 24″
Schedules : Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH
Grades : PSL1 and PSL2
A333 (Low Temp) Grade 1/6 Carbon Steel Seamless Pipe
Size Range : 1/2″ – 24″
Schedules : Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH
A53 API5L Grade B X-42 X-52 X-60 ERW (Electric Resistance Welded) Pipe
Size Ranges : 2″ – 24″
Schedules : 10, 20, Standard (STD), Extra Heavy (XH)
Non-Schedules : .120wall, .156wall, .188wall, .203 wall, .219wall etc.
Grades : API-5L Gr B, API-5L Gr X42, API-5L Gr X52, API-5L Gr X60, API-5L Gr X65PSL1 and PSL2
API5L Grade B X-42 X-52 X-60 DSAW/SAW
Size Ranges : 26″ – 60″
Schedules : 20, Std, XH, 30
Grades : API-5L Gr B, API-5L Gr X42, API-5L Gr X52, API-5L Gr X60, API-5L Gr X65PSL1 and PSL2
Sizes (Seamless) : 1/2” NB – 60” NB
Wall Thickness available:
Schedule 20 Schedule XXS (heavier on request) up to 250 mm thk
Carbon Steel Pipes Test Certificates 

We give Manufacturer TC (Test Certificate) in understanding to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We likewise give Standard authentications like EN 10204 3.1 and extra necessity like. NACE MR 01075. FERRIT CONTENT according to standards whenever mentioned by customers. 

  • EN 10204/3.1B, 
  • Raw Materials Certificate 
  • 100% Radiography Test Report 
  • Third Party Inspection Report, and so forth
Material Testing: 

We guarantee that every one of our materials experience exacting quality tests before dispatching them to our customers. 

  • Mechanical Testing Such as Tensile of Area 
  • Hardness Test 
  • Chemical Analysis – Spectro Analysis 
  • Positive Material Identification – PMI Testing 
  • Flattening Test 
  • Micro and MacroTest 
  • Pitting Resistance Test 
  • Flaring Test 
  • Intergranular Corrosion (IGC) Test 
Carbon Steel Pipe Exporter 

Taiwan, Poland, Macau, Israel, Serbia, Malaysia, Germany, Venezuela, Poland, Peru, Mexico, United Kingdom, Austria, Portugal, United Arab Emirates, Jordan, Ecuador, Nigeria, Chile, Czech Republic, Afghanistan, Ireland, Philippines, Iran, Chile, Netherlands, Colombia, Russia, Lebanon, Indonesia, Morocco, Greece, Spain, Bangladesh, Zimbabwe, New Zealand, Thailand, Gabon, India, Tibet, Australia, Nigeria, Angola, Sri Lanka, Libya, Hong Kong, Canada, Namibia, Norway, Puerto Rico, Yemen, Romania, Mongolia, Brazil, Costa Rica, South Korea, Finland, Lithuania, Italy, Mexico, Kuwait, Switzerland, Bhutan, Bulgaria, Nepal, Singapore, China, Kenya, Croatia, Japan, Sweden, Trinidad and Tobago,Tunisia, Egypt, France, Bolivia, Belgium, Qatar, Slovakia, Kazakhstan, Ghana, Turkey, South Africa, Azerbaijan, Oman, Belarus, Gambia, Saudi Arabia, Ukraine, Pakistan, United States, Iraq, Iran, Bahrain, Algeria, Argentina, Hungary, Denmark, Estonia, Vietnam

Stainless Steel 316/316L Pipes

Stainless Steel 316/316L Pipes

Stainless Steel 316 Pipes

Nakoda Steel Industry is one of the 316/316L Stainless Steel Pipes & Tubes Manufacturers in India, where low nickel substance of it makes them value stable. Tempered Steel 316 Seamless Pipes is essential because of advances in steelmaking strategies especially regarding control of nitrogen content. The high mechanical quality of Stainless Steel 316 Welded Pipes is an aftereffect of the duplex microstructure and the alloying with nitrogen. Treated Steel 316 Seamless Pipes are shaped from a roughly 50/50 blend of austenitic and ferritic stages and are here and there alluded to as austenitic-ferritic tempered steels. Tempered Steel UNS S30400 ERW Pipes gives them a critical favorable position more than 300 and 400 arrangement treated steels.

Treated Steel 304 EFW Pipes has a higher quality material than ordinary austenitic tempered steels and standard duplex evaluations. Hardened Steel 304H Round Pipes is utilized in a wide scope of utilizations in enterprises, for example, oil, gas, paper, compound, and marine. Treated Steel 316 Square Pipes join the best properties of both austenitic and ferritic hardened steels and give high quality/pliability with great erosion protection from consumption (counting pressure consumption splitting). This high quality of Stainless Steel DIN 1.4301 Pipes gives open doors for diminishing both weight and cost as a more slender material can be utilized. The standard austenitic Stainless Steel 316 Hexagonal Pipes are generally simple to make and to create. As their names suggest, Stainless Steel 316 Hallow Pipes comprise principally of one stage, austenite or ferrite. 

Hardened Steel 316 Seamless Pipe, SS GOST 03Ch17N14M3 Pipes, SS 316 Hexagonal Pipes, Stainless Steel 316L Welded Pipes, 316L SS Bush Hex Pipe, SS 316L Seamless Pipe, 316 SS Hallow Pipes, TP316 SS Welded Pipe Manufacturer in India.

SS 316-316L Seamless Pipes Specifications

Specifications : ASTM A 312 ASME SA 312 / ASTM A 358 ASME SA 358
Dimensions : ASTM, ASME and API
SS 316 Pipes : 1/2 NB – 16 NB
ERW 316 Pipes : 1/2 NB – 24 NB
EFW 316 Pipes : 6 NB – 100 NB
Size : 1/8NB TO 30NB IN
Specialized in : Large Diameter Size
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes
Form : Round, Square, Rectangular, Hydraulic Etc
Length : Single Random, Double Random & Cut Length.
End : Plain End, Beveled End, Treaded

316-316L Steel Pipes Test Certificates 

We at GIC give Manufacturer TC (Test Certificate) in agreement to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We likewise give Standard endorsements like EN 10204 3.1 and extra necessity like. NACE MR 01075. FERRIT CONTENT according to standards whenever mentioned by customers. 

  • EN 10204/3.1B, 
  • Raw Materials Certificate 
  • 100% Radiography Test Report 
  • Third Party Inspection Report, and so forth 

Material Testing: 

We at Nakoda Steel Industry guarantee that every one of our materials experience severe quality tests before dispatching them to our customers. 

  • Mechanical Testing Such as Tensile of Area 
  • Hardness Test 
  • Chemical Analysis – Spectro Analysis 
  • Positive Material Identification – PMI Testing 
  • Flattening Test 
  • Micro and Macro Test 
  • Pitting Resistance Test 
  • Flaring Test 
  • Intergranular Corrosion (IGC) Test 

316-316L Stainless Steel Pipe Exporter 

Poland, Thailand, Gabon, India, Tibet, Australia, Nigeria, Angola, Sri Lanka, Libya, Hong Kong, Mexico, Kuwait, Switzerland, Bhutan, Bulgaria, Nepal, Singapore, China, Kenya, Croatia, Japan, Sweden, Trinidad and Tobago, Tunisia, Egypt, France, Bolivia, Peru, Mexico, United Kingdom, Austria, Portugal, United Arab Emirates, Jordan, Ecuador, Nigeria, Chile, Czech Republic, Philippines, Iran, Chile, Netherlands, Canada, Namibia, Norway, Puerto Rico, Yemen, Romania, Mongolia, Brazil, Costa Rica, South Korea, Finland, Lithuania, Italy, Qatar, Colombia, Russia, Lebanon, Indonesia, Bangladesh, Zimbabwe, New Zealand, Belgium, Taiwan, Poland, Macau, Israel, Serbia, Malaysia, Germany, Venezuela, Afghanistan, Ireland, Slovakia, Kazakhstan, Ghana, Turkey, South Africa, Azerbaijan, Oman, Belarus, Gambia, Saudi Arabia, Ukraine, Morocco, Greece, Spain, Pakistan, United States, Iraq, Iran, Bahrain, Algeria, Argentina, Hungary, Denmark, Estonia, Vietnam

Hi, How Can We Help You?
Translate »