• info@nakodasteelindustry.com
  • 9516618000

Welcome to Nakoda International

Alloy Steel Flanges

Nakoda Steel Industry is a known assembling, sending out, providing, and exchanging unit of Alloy Steel Flanges, which is offered in differing and customized requests sizes, structures, and shapes for our regarded demographics. We additionally offer the equivalent in various evaluations, for example. This Slip-on Flanges can be machined, shot-peened, and cleaned in as – fabricated or stress diminished states whenever required, where rust is the undeniable noticeable proof of destructive movement. Arrangement strengthening of our Alloy Steel Threaded Flanges isn’t fundamental for the explanation that the mechanical properties of as-constructed state are demonstrating wanted qualities. A special case to this is these Weld Neck Flanges has roughly 24 % chromium and can be utilized to oppose scaling at temperatures up to 1100 Degree C.Our Blind Flanges for the most part happens because of ecological factors, for example, wind introduction, modern contamination and raised temperatures, and is more regrettable closer to the ocean, a fundamental driver of salt water contamination. The high chromium content which is so gainful to the wet consumption obstruction of these Socket Weld Flanges is also exceptionally useful to their high temperature quality and protection from scaling at raised temperatures. 

Compound Steel Ring Joint Flange, ASME SA182 Lap Joint Flange, Screwed Flanges Stockist, ANSI B16.5 Chrome Moly Ring Type Joint Flanges, Alloy Steel Industrial Flanges Stockholder, Alloy Steel Forged Flanges Manufacturer.

 Flanges Specifications

Specifications : ASTM A182 / ASME SA182
Size : 1/2″ (15 NB) to 48″ (1200NB)
Standards : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc

 Flanges Test Certificates 

We give Manufacturer TC (Test Certificate) in agreement to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We likewise give Standard endorsements like EN 10204 3.1 and extra necessity like. NACE MR 01075. FERRIT CONTENT according to standards whenever mentioned by customers. 

  • EN 10204/3.1B, 
  • Raw Materials Certificate 
  • 100% Radiography Test Report 
  • Third Party Inspection Report, and so forth 

Material Testing: 

We Nakoda Steel Industry guarantee that every one of our materials experience severe quality tests before dispatching them to our customers. 

  • Mechanical Testing Such as Tensile of Area 
  • Hardness Test 
  • Chemical Analysis – Spectro Analysis 
  • Positive Material Identification – PMI Testing 
  • Flattening Test 
  • Micro and Macro Test 
  • Pitting Resistance Test 
  • Flaring Test 
  • Intergranular Corrosion (IGC) Test 

Alloy Steel Pipe Flanges Exporter 

Poland, Thailand, Gabon, India, Tibet, Australia, Nigeria, Angola, Sri Lanka, Libya, Hong Kong, Mexico, Kuwait, Switzerland, Bhutan, Bulgaria, Nepal, Singapore, China, Kenya, Croatia, Japan, Sweden, Trinidad and Tobago,Tunisia, Egypt, France, Bolivia, Peru, Mexico, United Kingdom, Austria, Portugal, United Arab Emirates, Jordan, Ecuador, Nigeria, Chile, Czech Republic, Philippines, Iran, Chile, Netherlands, Canada, Namibia, Norway, Puerto Rico, Yemen, Romania, Mongolia, Brazil, Costa Rica, South Korea, Finland, Lithuania, Italy, Qatar, Colombia, Russia, Lebanon, Indonesia, Bangladesh, Zimbabwe, New Zealand, Belgium, Taiwan, Poland, Macau, Israel, Serbia, Malaysia, Germany, Venezuela, Afghanistan, Ireland, Slovakia, Kazakhstan, Ghana, Turkey, South Africa, Azerbaijan, Oman, Belarus, Gambia, Saudi Arabia, Ukraine, Morocco, Greece, Spain, Pakistan, United States, Iraq, Iran, Bahrain, Algeria, Argentina, Hungary, Denmark, Estonia, Vietnam.