Alloy Steel P1 Pipe

Nakoda Steel Industry is referred to as the maker of AS P1 Pipes, which can’t be utilized in hydrochloric corrosive because of the danger of limited and uniform consumption. These Alloy Steel P1 Seamless Pipes are particularly valuable in seaward oil and gas applications and in wells by methods for either normally high saline solution levels or where brackish water has been infused to improve recuperation. Above All Our Alloy Steel P1 Welded Pipes isn’t suggested for applications that require long exposures to temperatures more than 570 Degree F in light of the expanded danger of a decrease in sturdiness. Similarly In weaken sulphuric corrosive polluted with chloride particles, these. Alloy Steel P1 EFW Pipes has preferable erosion opposition over different composites, However which is a profoundly alloyed austenitic steel grade uncommonly intended to oppose unadulterated sulphuric corrosive.

However, our Alloy Steel P1 ERW Pipes can be utilized in weaken hydrochloric corrosive, which further has brilliant restricted setting obstruction. Setting need not be a hazard in the zone underneath the fringe of these. Alloy Steel P1 Round Pipes, yet fissure must be maintained a strategic distance from. Through augmentations of chromium, molybdenum and nitrogen in our Alloy Steel P1 Square Pipes, confined erosion, for example, setting and fissure assault are improved. Therefore, Arrangement toughening of these. Alloy Steel P1 Rectangular Pipes ought to be performed at the temperature go from 1025 Degree C to 1125 Degree C pursued by being extinguished in water or quickly cooled by different methods. 

Therefore, Amalgam Steel Seamless Pipe, Alloy Steel P1 Chrome-moly Pipes, Alloy Steel Pipes, Alloy Steel P1 EFW Pipes, Alloy Steel P1 Hexagonal Pipe, ASME SA335 High Pressure Alloy Pipes, Alloy Steel Gr.P1 Pipes, P1 Alloy Steel Seamless Pipe Manufacturer in India.

P1 Alloy Steel Pipes Test Certificates 

Therefore, We give Manufacturer TC (Test Certificate) in agreement to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We likewise give Standard endorsements like EN 10204 3.1 and extra prerequisite like. Similarly NACE MR 01075. FERRIT CONTENT according to standards whenever mentioned by customers. 

• EN 10204/3.1B, 
• Raw Materials Certificate 
• 100% Radiography Test Report 
• Third Party Inspection Report, and so forth 

Material Testing: 

Similarly, We at Nakoda Steel Industry guarantee that every one of our materials experience severe quality tests before dispatching them to our customers. 

• Mechanical Testing Such as Tensile of Area 
• Hardness Test 
• Chemical Analysis – Spectro Analysis 
• Positive Material Identification – PMI Testing 
• Flattening Test 
• Micro and MacroTest 
• Pitting Resistance Test 
• Flaring Test 
• Intergranular Corrosion (IGC) Test 

P1 Alloy Steel Pipe Exporter

Similarly Macau, Israel, Serbia, Malaysia, Germany, Venezuela, Poland, Peru, Mexico, United Kingdom, Austria, Portugal, United Arab Emirates, Jordan, Ecuador, Nigeria, Chile, Czech Republic, Afghanistan, Ireland, Philippines, Iran, Chile, Netherlands, Colombia, Russia, Lebanon, Indonesia, Bangladesh, Zimbabwe, New Zealand, Thailand

Likewise Gabon, India, Tibet, Australia, Nigeria, Angola, Sri Lanka, Libya, Hong Kong, Canada, Namibia, Mexico, Kuwait, Switzerland, Bhutan, Bulgaria, Nepal, Singapore, China, Kenya, Croatia, Japan, Sweden, Trinidad and Tobago,Tunisia, Egypt, France, Bolivia, Belgium, Taiwan, Poland, Norway, Puerto Rico, Yemen, Romania, Mongolia, Brazil

Costa Rica, South Korea, Finland, Lithuania, Italy, Qatar, Slovakia, Kazakhstan, Ghana, Turkey, South Africa, Azerbaijan, Oman, Belarus, Gambia, Saudi Arabia, Ukraine, Morocco, Greece, Spain, Pakistan, United States, Iraq, Iran, Bahrain, Algeria, Argentina, Hungary, Denmark, Estonia, Vietnam.