Carbon Steel Seamless Pipe
Nakoda Steel Industry is one of the pioneers in Carbon Steel Seamless Pipes manufacturer , which forestalls spalling of the defensive layer. The arrangement of Carbon Steel Bush Hex Pipes incorporates significant measures of nickel, chromium, and aluminum for a high level of protection from oxidation and carburization at high temperatures. The fantastic obstruction of Carbon Steel Hallow Pipes to oxidation results from the combination’s chromium and aluminum substance. At raised temperatures, those components in Carbon Steel Hexagonal Pipes cause the arrangement of a flimsy, subsurface zone of oxide particles. The zone of Carbon Steel Rectangular Pipes shapes quickly upon introduction to high temperatures until it arrives at a brilliant thickness.
The oxide zone of Carbon Steel Square Pipes gives the best possible dissemination conditions to the arrangement of a defensive chromium oxide layer on the outside of the metal. Nakoda Steel International is one of the well – realized sending out house and vendor for Carbon Steel Round Pipes, which shows strangely great metallurgical steadiness for a combination of its quality level. Carbon Steel EFW Pipes demonstrates the predominance of over combinations of comparative quality in a gas – carburization test at 1800 Degree F. In bubbling nitric corrosive, at fixations under 20 %, erosion paces of Carbon Steel ERW Pipes are less. At 70 % focus, the pace of Carbon Steel Welded Pipes is a moderately low, where the rates were resolved from trial of 72 hours term.
Carbon Steel A53/A106 gr B Carbon Steel Pipe, CS Seamless Pipes, Carbon Steel Bush Hex Pipe, Carbon Steel API5L Pipes Exporter, CS Hexagonal Pipe, A106 CS Seamless Pipes, CS Hollow Pipe, Carbon Steel Seamless Black Round Pipes Manufacturer in India.
A500 Carbon Steel Seamless Pipes Specifications |
||
A53 A106 API5L Grade B/C X42 Seamless Pipe |
||
| Size Range | : | 2″ – 24″ |
| Schedules | : | Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH |
| Grades | : | PSL1 and PSL2 |
A333 (Low Temp) Grade 1/6 Carbon Steel Seamless Pipe |
||
| Size Range | : | 1/2″ – 24″ |
| Schedules | : | Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH |
A53 API5L Grade B X-42 X-52 X-60 ERW (Electric Resistance Welded) Pipe |
||
| Size Ranges | : | 2″ – 24″ |
| Schedules | : | 10, 20, Standard (STD), Extra Heavy (XH) |
| Non-Schedules | : | .120wall, .156wall, .188wall, .203 wall, .219wall etc. |
| Grades | : | API-5L Gr B, API-5L Gr X42, API-5L Gr X52, API-5L Gr X60, API-5L Gr X65PSL1 and PSL2 |
API5L Grade B X-42 X-52 X-60 DSAW/SAW |
||
| Size Ranges | : | 26″ – 60″ |
| Schedules | : | 20, Std, XH, 30 |
| Grades | : | API-5L Gr B, API-5L Gr X42, API-5L Gr X52, API-5L Gr X60, API-5L Gr X65PSL1 and PSL2 |
| Sizes (Seamless) | : | 1/2” NB – 60” NB |
| Wall Thickness available: | ||
| Schedule 20 | – | Schedule XXS (heavier on request) up to 250 mm thk |
Carbon Steel Pipes Test Certificates
We give Manufacturer TC (Test Certificate) in understanding to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We likewise give Standard authentications like EN 10204 3.1 and extra necessity like. NACE MR 01075. FERRIT CONTENT according to standards whenever mentioned by customers.- EN 10204/3.1B,
- Raw Materials Certificate
- 100% Radiography Test Report
- Third Party Inspection Report, and so forth
Material Testing:
We guarantee that every one of our materials experience exacting quality tests before dispatching them to our customers.- Mechanical Testing Such as Tensile of Area
- Hardness Test
- Chemical Analysis – Spectro Analysis
- Positive Material Identification – PMI Testing
- Flattening Test
- Micro and MacroTest
- Pitting Resistance Test
- Flaring Test
- Intergranular Corrosion (IGC) Test