Stainless Steel 304H Flanges
Nakoda Steel Industry is one of the leading Suppliers, Manufacturers, and Global suppliers of Stainless Steel 304H Flanges, which is a steel amalgam with at least 10.5 % chromium content by mass. Our SS 304H Slip On Flanges is eminent for its erosion opposition, and it is generally utilized for nourishment taking care of and cutlery among numerous different applications. These threaded Flanges don’t promptly erode, rust or stain with water as standard steel does. Nonetheless, our Stainless Steel 304H Weld Neck Flanges isn’t completely recolor – evidence in low – oxygen, high – saltiness, or poor air–flow situations. These Stainless Steel 304H Blind Flanges are utilized where both the properties of steel and consumption obstruction are required. Our SS UNS S30409 Socket Weld Flanges vary from carbon steel by the measure of chromium present. These unprotected Lap Joint Flanges rusts promptly when presented to air and dampness. Since iron oxide has lower thickness than these Ring Joint Type Flanges, the film grows and will in general drop and fall away. In examination, our Spectacle Blind Flanges contain adequate chromium to experience passivation, shaping a latent film of chromium oxide superficially. The layer forestalls further consumption by blocking oxygen dissemination to the outside of these Spacer Flanges and prevents erosion from spreading into the majority of the metal.
Tempered Steel F304H Industrial Flanges, SS 304H Nippolet Flangs, ANSI B16.5 SS F304H Ring Type Joint Flanges, 150# ANSI SS 304H Flanges Stockholder, SS 304H Screwed Flanges Stockist, SS Grade F304H Forged Flanges Manufacturer in India.
SS 304H Pipe Flanges Specifications |
||
| Specifications | : | ASTM A182 / ASME SA182 |
| Size | : | 1/2″ (15 NB) to 48″ (1200NB) |
| Standards | : | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
304H Pipe Flanges Test Certificates
We give Manufacturer TC (Test Certificate) in agreement to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We likewise give Standard endorsements like EN 10204 3.1 and extra necessity like. NACE MR 01075. FERRIT CONTENT according to standards whenever mentioned by customers.- EN 10204/3.1B,
- Raw Materials Certificate
- 100% Radiography Test Report
- Third Party Inspection Report, and so forth
Material Testing:
We Nakoda Steel Industry guarantee that every one of our materials experience severe quality tests before dispatching them to our customers.- Mechanical Testing Such as Tensile of Area
- Hardness Test
- Chemical Analysis – Spectro Analysis
- Positive Material Identification – PMI Testing
- Flattening Test
- Micro and Macro Test
- Pitting Resistance Test
- Flaring Test
- Intergranular Corrosion (IGC) Test