Carbon Steel A694 Flanges
Nakoda Steel Industry is a known producer of ASTM A694 CS Flanges, where the high quality can present issues. ASTM A694 Carbon Steel Slip On Flanges is saved for those steels that contain a humble measure of alloying components and that typically rely upon warm treatment to create explicit properties. In any event, when the malleability is sufficient, higher powers in ASME SA 105 Carbon Steel Threaded Flanges are required to shape the material, for instance, in-cylinder bowing. The warmth treatment in ASTM A694 Carbon Steel Socket Weld Flanges ought to be trailed by resulting quick cooling in water or air, where this treatment applies for both arrangement strengthening and stress assuaging. In unique cases, ASME SA 105 Carbon Steel Weld Neck Flanges should be possible at 500 Degree C – 550 Degree C. Nakoda Steel Industry is one of the stockiest and merchant for top notch.
Carbon Steel Blind Flanges, where there is one special case to the ordinary principle of more unfortunate machinability. ASME SA 105 Carbon Steel Lap Joint Flanges are commonly more requesting to machine than customary austenitic tempered steel, because of the higher hardness. Nonetheless, ASTM A694 Carbon Steel Ring Joint Type Flanges has demonstrated great machining properties. ASME SA 105 Carbon Steel Spectacle Blind Flanges is lean steel that by and large offers a comparable consumption obstruction, yet has points of interest in oxidizing media, for example, nitric corrosive arrangements because of its low molybdenum content.
ANSI B16.5 Carbon Steel A694 Ring Type Joint Flanges, Industrial Flanges Stockholder, ASME SA694 Carbon Steel Lap Joint Flange, Carbon Steel F65 Screwed Flanges Stockist, Carbon Steel Forged Flanges Manufacturer
Carbon Steel A694 Pipe Flanges Specifications |
||
| Specifications | : | ASTM A694 / ASME SA694 |
| Size | : | 1/2″ (15 NB) to 48″ (1200NB) |
| Flange Face Type | : | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc |
Carbon Steel A694 Pipe Flanges Test Certificates
We give Manufacturer TC (Test Certificate) in agreement to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We likewise give Standard endorsements like EN 10204 3.1 and extra necessity like. NACE MR 01075. FERRIT CONTENT according to standards whenever mentioned by customers.- EN 10204/3.1B,
- Raw Materials Certificate
- 100% Radiography Test Report
- Third Party Inspection Report, and so forth
Material Testing:
We Nakoda Steel Industry guarantee that every one of our materials experience severe quality tests before dispatching them to our customers.- Mechanical Testing Such as Tensile of Area
- Hardness Test
- Chemical Analysis – Spectro Analysis
- Positive Material Identification – PMI Testing
- Flattening Test
- Micro and Macro Test
- Pitting Resistance Test
- Flaring Test
- Intergranular Corrosion (IGC) Test