Carbon Steel A350 LF2 Flanges
Nakoda Steel Industry is a known producer of ASTM A350 LF2 CS Flanges, where the high quality can present issues. Carbon Steel Slip On Flanges is saved for those steels that contain an unassuming measure of alloying components and that typically rely upon warm treatment to create explicit properties. In any event, when the pliability is satisfactory, higher powers in ASME SA 105 Carbon Steel Threaded Flanges are required to frame the material. For instance in-cylinder twisting. The warmth treatment in ASTM A350 LF2 Carbon Steel Socket Weld Flanges ought to be trailed by ensuing quick cooling in water or air, where this treatment applies for both arrangement strengthening and stress easing. In extraordinary cases, ASME SA 105 Carbon Steel Weld Neck Flanges should be possible at 500 Degree C – 550 Degree C.
Nakoda Steel Industry is one of the stockiest and broker for great ASTM A350 LF2 Carbon Steel Blind Flanges. Where there is one exemption to the typical standard of more unfortunate machinability. ASME SA 105 Carbon Steel Lap Joint Flanges are commonly more requesting to machine than regular austenitic hardened steel, because of the higher hardness. Be that as it may, ASTM A350 LF2 Carbon Steel Ring Joint Type Flanges has demonstrated phenomenal machining properties. ASME SA 105 Carbon Steel Spectacle Blind Flanges is lean steel that for the most part offers a comparative consumption opposition, yet has focal points in oxidizing media, for example, nitric corrosive arrangements because of its low molybdenum content.
Spacer, LTCS Flanges, ANSI B16.5 Carbon Steel Ring Type Joint Flanges, Carbon Steel Industrial Flanges Stockholder, ASME SA350 Lap Joint Flange, Carbon Steel A Nippolet Flanges, Carbon Steel Screwed Flanges Stockist, Carbon Steel Forged Flanges Manufacturer.
Carbon Steel A350 LF2 Pipe Flanges Specifications |
|||
| Specifications | : |
|
|
| Size | : | 1/2″ (15 NB) to 48″ (1200NB) | |
| Flange Face Type | : | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) | |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. | |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc | |
A350 LF2 Pipe Flanges Test Certificates
We give Manufacturer TC (Test Certificate) in agreement to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We likewise give Standard endorsements like EN 10204 3.1 and extra necessity like. NACE MR 01075. FERRIT CONTENT according to standards whenever mentioned by customers.- EN 10204/3.1B,
- Raw Materials Certificate
- 100% Radiography Test Report
- Third Party Inspection Report, and so forth
Material Testing:
We Nakoda Steel Industry guarantee that every one of our materials experience severe quality tests before dispatching them to our customers.- Mechanical Testing Such as Tensile of Area
- Hardness Test
- Chemical Analysis – Spectro Analysis
- Positive Material Identification – PMI Testing
- Flattening Test
- Micro and Macro Test
- Pitting Resistance Test
- Flaring Test
- Intergranular Corrosion (IGC) Test