Nakoda Steel Industry is a recognized manufacturer and exporter of Carbon Steel Round Bars, which contain a small number of incidental elements leftover from steelmaking. We also offer the same in different grades and specifications such as Carbon Steel Round Bars, Carbon Steel Round Bars, Carbon Steel Round Bars, Carbon Steel Round Bars, and EN SERIES Carbon Steel Round Bars. To change the properties of Carbon Steel Square Bars is by adding alloying elements other than carbon that produce characteristics not achievable in plain carbon steel. Each of the approximately 20 elements used for Carbon Steel Flat Bars has a distinct influence on microstructure and on the temperature, holding time, and cooling rates at which microstructures change.

Carbon steel Grade	Carbon Steel A105 Round Bar Carbon Steel A350 LF2, Carbon Steel AISI 1018, 1026, 1025 Carbon Steel AISI 1045, Carbon Steel En Series.L
Specifications/strong>	ASTM A105, ASME SA105
Dimensions	EN, DIN, JIS, ASTM, BS, ASME, AISI
Carbon Steel A105 Round Bars	3.0 – 50.8 mm, over 50.8 – 300mm
Carbon Steel Rectangular Bars	6.35 x 12.7mm,6.35 x 25.4mm,12.7 x 25.4mm
Carbon Steel Hex Bars	AF5.8mm–17mm
Carbon Steel Square Bars	AF2mm – 14mm, AF6.35mm,9.5mm,12.7mm, 15.98mm,19.0mm, 25.4mm
Carbon Steel Flat Bars	1/2” to 10” in thickness range of 2mm to 150mm
Finish	Bright, Polish & Black
Length	1 to 6 Meters, Custom Cut Lengths
Form	Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.